Harmonica Sessions®
A Mel Bay Publications, Inc. Webzine



August 2010 · Bimonthly







Contact Us


If you liked this article, you might be interested in:

Harmonicare Chart
by: Phil Duncan



My Next Favorite Tool


Harmonica Workbench


by Kinya Pollard


It was love at first site (don't tell Mrs. Harpsmith). I think I found my next new favorite tool.

Many of you have read or heard that my least favorite Harp-Tech thing to do is tuning. So when I unwrapped the new 2oz high speed rotary "engraver" from Micro Mark with 3/32" chuck (M-M #84446), I was moved to thank the Harmonica Gods.

With an assortment of available carbide bits (#60476) I am expecting tuning chores to be quick and precise.

It did not take long for me to discover the numerous possible holding positions to handle all tuning tasks. The most popular position was to have my index finger pushing down on the on/off button.


This photo shows the index finger pulling up on the button.

For you "thumbers" try depressing the button with your thumb.


Removing metal on a flatted draw reed is a snap, especially when supported by Richard Sleigh's reed tool.

Here I am tuning down a reed too sharp by removing metal from the rivet end of the reed.


In a variation on Richard Sleigh's edge tuning technique; these photos demonstrate how a straight cutter bit can easily trim metal from the edge of the reed.


Creating a paddy tune harmonica or Lee Oskar type Melody Maker requires raising the blow reed #3, one whole step (e.g. on a C harmonica, raise G pitch up to A). This process is easily sped up by laying the straight cut bit flat to the reed and "planing" the metal off.


For you old timers, remember that electric board game "Operation," by Milton Bradley first marketed in 1965. If your tweezers touched the side walls of Cavity Sam, his red clown sized nose would illuminate. Keep this game in mind when you are tuning a blow reed (flat or sharp). Although the 3/32" bits are small enough, if you don't have a steady hand, you will nick the reed plate slot. Be careful or your nose will turn red in anger.


"Play the notes people want to hear" © 2008

Kinya Pollard
The Harpsmith

Musician & Harp-Tech
Harmonica Masterclass Workshop Instructor
Mel Bay's Harmonica Sessions Columnist
www.bluesharmonica.com Harp-Tech Expert

Celebrity Hands
Guess whose hand this is? Hint: This maestro was next in line to fill the first chair harmonica position in Muddy Water's Band

 

 

"Play the notes people want to hear" © 2008

Kinya Pollard
The Harpsmith

 

 



top ]

Copyright © 2010 Mel Bay Publications, Inc. All Rights Reserved.

Webzines:
Guitar Sessions® · Creative Keyboard® · Fiddle Sessions® · Banjo Sessions® · Harmonica Sessions® · Dulcimer Sessions®
Percussion Sessions® · Bass Sessions® · Mandolin Sessions® · Ukulele Sessions®